2) Peel the protect paper of the adhesive 3M sticker, and attach the alarm on table or on wall space;
3) Stick the sensor on display product; Once the display product is pasted stably, the alarm controller will give a "Beep" sound, LED light will begin flashing for 5-6 times, then the alarm controller is on alert. The LED light will flash every 8 seconds.
4) Operations when alarm comes.
The alarm controller will give alarm once the situation happened as below:
A) Sensor is separated with the display product
B) Cable is cut off
C) Alarm controller is separated with table or wall.
Once the alarm comes, please take off the alarm controller, turn off the switch power at the bottom, the alarm will be stop right away.
After turn off the alarm controller, please check the alarm reason. If it is because of the cable or sensor damage, new alarm should be replaced immediately .
Note: Please make sure the bottom switch power is turned on.
5) Battery low voltage indication: When the interior battery in the alarm controller is low voltage, the alarm controller will give indication sound, new alarm should be replaced immediately .